SOLTEK SL-75DRV2 User Manual page 78

75DRV2
* IRQ ACTIVITY MONITORING
CMOS Setup Utility - Copyright (C) 1984-2001 Award Software
Primary INTR
IRQ-3 (COM2)
IRQ-4 (COM1)
IRQ-5 (LPT2)
IRQ-6 (Floppy Disk)
IRQ-7 (LPT1)
IRQ-8 (RTC Alarm)
IRQ-9 (IRQ2 Redir)
IRQ-10 (Reserved)
IRQ-11 (Reserved)
IRQ-12 (PS/2 Mouse)
IRQ 13 (Coprocessor)
IRQ 14 (Hard Disk)
IRQ 15 (Reserved)
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
IRQ Activity Monitor-
3. Press <ESC> to return to the Main Menu when you finish setting up all
items.
IRQ Activity Monitoring
The following is a list of IRQ's (Interrupt Requests),
ing which can be exempted much as the COM ports
and LPT ports above can. When an I/O device wants
to gain the attention of the operating system, it
signals this by causing an IRQ to occur. When the
operating system is ready to respond to the request,
it interrupts itself and performs the service. When
set On, activity will neither prevent the system from
going into a power management mode nor awaken
it.
78
ON
Enabled
Menu Level
Enabled
Enabled
Enabled
Enabled
Disabled
Disabled
Disabled
Disabled
Enabled
Enabled
Enabled
Disabled
Item Help