SOLTEK SL-75DRV2 User Manual page 80

75DRV2
PNP OS Installed Select Yes if the system operating environment is
NOTE:
BIOS will automatically disable all PnP resources except
the boot device card when you select Yes on Non-PnP operating
system.
Reset Configuration
Resource Controlled
PCI/VGA Palette Snoop This option allows the BIOS to preview VGA status,
Assign IRQ for VGA Select Enabled if you system has a VGA controller
Assign IRQ for USB Select Enabled if you system has a USB controller
Plug-and-Play aware (e.g., Windows95).
Normally, you leave this Disabled. Select Enabled
Data to reset Extended System Configuration Data
(ESCD), when you exit Setup if you have installed
a new add-on and the system reconfiguration has
caused such a serious conflict that the operating
system cannot boot.
The Plug and Play AwardBIOS can automatically
By configure all the boot and Plug and Play-compatible
devices. If you select Auto, all the interrupt request
(IRQ) and DMA assignment fields disappear, as the
BIOS automatically assigns them.
and to modify the information delivered form the
feature Connector of the VGA card to MPEG card.
This option can solve the display inversion to black
after you have used MPEG card.
and you have one or more VGA devices connected.
If you are not using your system's VGA controller,
select Disabled to free the IRQ resource.
and you have one or more USB devices connected.
If you are not using your system's USB controller,
select Disabled to free the IRQ resource.
80