SOLTEK SL-75DRV2 User Manual page 43

6 Select "Install VIA ATAPI Vendor
Support Driver" checkbox,
then click the "Next" button to
continue.
8 Select "Install VIA AGP VxD"
in turbo mode and press "Next"
button to continue.
10 After all these setup procedures have finished, you should restart
your computer by clicking on "Finish" so as to put VIA 4in1 drivers
into effect and proceed to second driver installation.
7
Next
9
Next
Should restart system
Finish
43
Chapter 3 Software Setup
Click on "Click to enable DMA
Mode" checkbox to enable DMA
function, then click the "Next"
button to continue.
Select "Install VIA IRQ Routing
Miniport Driver" checkbox, then
click the "Next" button to
continue.
Next
Next