• Whenever you handle the card, grasp it only by its edges. DO NOT
TOUCH the exposed metal pins of the connector or the electronic com-
ponents.
Note:
2.2 Driver Installation
We recommend you install the driver before you install the MIC-3723/
3723R card into your system, since this will guarantee a smooth installa-
tion process.
The Advantech Device Drivers Setup program for the MIC-3723/3723R
card is included on the companion CD that is shipped with your DA&C
card package. Please follow the steps below to install the driver software:
Step 1: Insert the companion CD into your CD-ROM drive.
Step 2: The Setup program will be launched automatically if you have
the autoplay function enabled on your system. When the Setup Program
is launched, you'll see the following Setup Screen.
Note:
Keep the anti-static bag for future use. You
might need the original bag to store the card if
you have to remove the card from PC or trans-
port it elsewhere.
If the autoplay function is not enabled on your
computer, use Windows Explorer or Windows
Run command to execute SETUP.EXE on the
companion CD
13
Chapter 2