Figure 3.7:Differential-Load W/Ground Connections; Figure 3.8:Grounded-Load W/Floating Power - Advantech MIC-3723 User Manual

Figure 3.7: Differential-load w/Ground Connections
Current Sink Connections
MIC-3723/3723R's current loop output uses a 0 to +5 V (unipolar) volt-
age output as each channel's driving source. Current drive circuits consist
of a power field-effect transistor (FET). The current output's voltage bias
must be less then 50 V for accurate results. The card also provides an
internal +12 V power source for current loop excitation.
You can use three types of current sink connections:
1. Grounded load with a floating power supply.
2. Floating load with a grounded power supply.
3. Floating load with an internal +12 V power supply.
These are shown in the following illustrations.
Figure 3.8: Grounded-load w/Floating Power
31 Chapter 3