Fisher & Paykel DishDrawer DD24D 7 Installation Instructions Manual page 5

REMOVE THE LOWER DRAWER
4a
1
2
TERMINATE THE WIRING AS SHOWN
4c
Remove knock-out for cable clamp and
fit a suitable cable clamp for the conduit.
11
12
Use copper conductors only.
4
OPTIONALLY HARD WIRING PRIOR TO INSTALLATION
4
3
To prevent kinked hoses, we recommend
rotating the drawer anti-clockwise and
resting it on its side after removal.
5
Press the release tabs in on
either side and push back
to release drawer from
runners.
11
10
9
REMOVE THE ACCESS COVER & POWER CORD
4b
4
Access
6
cover
WARNING!
Electrical Shock Hazard
Before continuing, ensure that the product is
disconnected from the power supply.
Failure to follow this warning may result in
electrical shock, injury or fire.
REFIT THE DRAWER ONTO THE RUNNERS & CLOSE
4d
19
13
Ensure the release tabs on
both sides are reset fully.
5
7
Ensure the drawer
is now rotated
clockwise back.
16
Before refitting the drawer,
ensure the hoses are not
twisted and the latches at
the rear of each drawer
runner are facing forward.
14
5
8
8
7
15