Fisher & Paykel DishDrawer DD24D 7 Installation Instructions Manual page 4

PARTS SUPPLIED - ALL MODELS
3a
Drain hose
Drain hose
support (1)
joiner (1)
Moisture protection
Hexagonal
tape (1)
socket for feet
(to prevent moisture
adjustment (2)
damage)
(long & short)
ADDITIONAL PARTS SUPPLIED WITH INTEGRATED MODELS
3b
Panel bracket (2)
(attached to product)
Wire clip (2)
Clamp (1)
(for securing
(for securing
Drain hose joiner)
Drain hose joiner)
Prefinished toekick (1)
Panel mounting Toekick mounting bracket (1)
screws (12)
(A custom toekick panel of any
material with thickness
3⁄8"-¾ " (9 - 19 mm) can be screwed
to the plastic toekick mounting
bracket)
Side mounting Top
bracket kit mounting
(A and B) (2) brackets (2)
OPTIONAL OPTIONAL
If the Drain hoses supplied are not long enough
to reach your services, you must use a Drain Hose
Extension Kit P/N 525798 which will extend the drain
hoses by 11' 10" (3.6m).
Edge Protector (1)
The kit is available from the nearest Fisher & Paykel
Authorized Service Center, or Toll free 1.888.936.7872
(If the services hole is through
a metal partition the hole
or www.fisherpaykel.com
must be protected with the
Edge protector supplied to
prevent damage to the power
cord or hoses.)
Toekick
mounting
screws (5)
4
Phillips Rubber
5⁄8" (16 mm) washer for
screws (9) inlet hose (1)
(comes already
fitted)