Fisher & Paykel DishDrawer DD24D 7 Installation Instructions Manual page 16

SECURE TO THE CABINETRY ON THE SIDES
12b
For further adjustment,
using the most appropriate
length Hexagonal socket
supplied, fully extend
leveling feet up to required
distance by hand.
Hexagonal
socket
x4
REFIT THE DRAWER ONTO THE RUNNERS
14b
Ensure the drawer
is now rotated
clockwise back.
4
16
5
19
1
13
Ensure the release tabs on
both sides are reset fully.
To access the side brackets,
you might have to push aside
the insulation. After securing,
ensure the sound insulation is
repositioned correctly.
Secure using two pairs
of formed brackets
(use 5⁄8" (16 mm)
screws). Repeat on
the other side of the
chassis.
Ensure product is level and
aligning with cabinetry.
3
15
Before refitting the drawer,
ensure the hoses are not
twisted and the latches at
the rear of each drawer
runner are facing forward.
2
14
OPTIONALLY SECURE TO THE CABINETRY ABOVE
13b 16
The top mounting
brackets will only bend
(x2)
upwards a maximum of
3⁄8"(10 mm).