Blower Operation - Jøtul GF 400 BV Sebago Installation And Operation Instructions Manual

Figure 35. Attach Blower to the Mounting
Bracket with the wingscrew and connect
wires to Snapstat and female control
quickconnect.

Blower Operation

The optional variable-speed blower will enhance heat
circulation around the firebox and out into the room.
The blower is controlled by a heat activated switch
(snapstat) that will ONLY function when the control
switch is in AUTO setting. After the fire has been
burning for a time, the snapstat will react to the heat
and activate the blower. Fan speed may be manually
adjusted with the rheostat knob. If the burner turns off,
the blower will be shut off automatically when the
stove cools down.
If automatic blower circulation is not desired, place
the blower control switch in the MANUAL position.
Figure 36. Blower Controls
Speed
Control
B U R N E R
Manual or
Automatic
Modes
Wingscrew
G
W
G
BL
BK
POWER
GY
SUPPLY
P P
BL
GY
MANUAL OFF AUTO
Figure 37. Blower Wiring Diagram
LABEL ALL WIRES PRIOR TO DISCONNECTION
WHEN SERVICING CONTROLS. WIRING ERRORS
CAN CAUSE IMPROPER AND DANGEROUS
OPERATION.
VERIFY OPERATION AFTER SERVICING.
ATTENTION:
Au moment de l'entrentien des commandes,
etiquietez tous le fils avant le debranchement.
es erreurs de ceblage peuvent entra tun
fonctionnement inadequat et dangereux.
Snapstat
Connectors
Male
Quickconnector
to Female
Quickconnector
BLOWER
W BK
BK BK
P
BK
BK BK
P
RHEOSTAT
SNAPSTAT
BR
P
P = QuickConnector Pin
BR
SWITCH
CAUTION:
21