Command Center Rx - Kyocera ECOSYS P2135dn Operation Manual

Setting Description
Device The machine's structure can be checked.
Information
Configuration, Counter, About Command Center RX
Job Status Displays all device information, including print jobs and job log history.
Printing Jobs Status, Printing Job Log
Device Settings Configure the advanced settings of the machine.
Paper/Feed/Output, Energy Saver/Timer, Date/Time, System
Function Configure the advanced function settings.
Settings Common/Job Defaults, Printer, E-mail
Network Settings Configure the network advanced settings.
General, TCP/IP, Protocol
Security Settings Configure the security advanced settings.
Device Security, Network Security, Certificates
Management Configure the advanced management settings.
Settings Authentication, Notification/Report, History Settings, SNMP, Reset
Connecting and Printing

Command Center RX

If the machine is connected to the network, you can configure various
settings using Command Center RX.
This section explains how to access Command Center RX, and how to
change security settings and the host name.
For details on Command Center RX, refer to the Command Center RX
User Guide.
Note To fully access the features of the Command Center RX
pages, enter the User Name and Password and click Login.
Entering the predefined administrator password allows the
user to access all pages and Settings on the navigation menu.
The factory default setting for the default user with
administrator privileges is shown below.
Login User Name
Login Password
* Upper case and lower case letters are distinguished
(case sensitive).
Settings that the administrator and general users can configure in
Command Center RX are as follows.
Admin
Admin
Administ- General
rator User
—
—
—
—
—
4-7