Kyocera ECOSYS P2135dn Operation Manual page 111

Using the Operation Panel
Indicators in Message Display
Ready
Ready, Data, and Attention Indicators
The following indicators light during normal operation and whenever the
printer needs attention. Depending on the status of lighting, each
indicator has the following meaning:
Indicator Description
Flashing. Indicates an error that you can resolve. For
details, refer to the Troubleshooting section in the
Operation Guide.
On. Indicates that the printer is ready. The printer prints the
data it receives.
Off. [Cancel] was pressed during Ready is displayed.
Data can be received but will not be printed. To resume
printing, press [Cancel] again.
Printing is canceling.
Also, indicates when paper jam occurred, toner has run
out, cover is open, and so on. For details, refer to the
Troubleshooting section in the Operation Guide.
Flashing. Indicates that a data is being received.
On. Indicates either that data received is being processed
before printing starts, or that data received is being written
to or read from a RAM disk or USB flash memory.
Flashing. Indicates that the printer is ready to print when
Please wait is displayed. Also indicates that the
corresponding paper cassette is not installed.
Indicates that the printer requires maintenance such as
adding paper, cleaning the printer, preparing the toner
container.
On. Indicates when paper jam occurred, toner has run out,
cover is open, and so on. If the message includes Press
GO, press [GO] to resume printing. For details, refer to the
Troubleshooting section in the Operation Guide.
The ID or Password entered for the Security or
Administrator function is not correct. Check the ID or
Password, and enter the correct ID or password.
7-5