Accessing Command Center Rx - Kyocera ECOSYS P2135dn Operation Manual

4-8

Accessing Command Center RX

1
Launch your Web browser.
2
In the address or location bar, enter the machine's IP address or the
host name.
Examples: https://192.168.48.21/ (for IP address)
https://P001 (if the host name is "P001")
The web page displays basic information about the machine and
Command Center RX as well as their current status.
Note If the screen There is a problem with this website's
security certificate. is displayed, configure the certificate. For
details on Certificates, refer to the Command Center RX User
Guide.
You can also continue the operation without configuring the
certificate.
3
Select a category from the navigation bar on the left of the screen.
When you log in to the machine as an administrator, you will see
Device Settings, Function Settings, Network Settings, Security
Settings, and Management Settings.
Connecting and Printing