Kyocera ECOSYS P2135dn Operation Manual page 159

>LAN Interface
? Auto
>MACAddressFilter
? Off
>Communication
? Standard NIC
Using the Operation Panel
2
Press [OK]. A blinking question mark (?) appears.
3
Press  or  to select the desired LAN Interface. The available LAN
Interface are as follows:
Auto
10BASE-Half
10BASE-Full
100BASE-Half
100BASE-Full
1000BASE-T
4
Press [OK].
5
Press [MENU]. The display returns to Ready.
MACAddressFilter (MAC address filtering setting)
This sets whether or not to enable MAC address filtering.
Note The detailed settings for MAC address filtering are selected
using the optional network interface kit utility software.
1
After entering the administrator ID and password, press  or 
repeatedly until >MACAddressFilter appears.
2
Press [OK]. A blinking question mark (?) appears.
3
Press  or  to select whether MAC address filtering is enabled.
4
Press [OK].
5
Press [MENU]. The display returns to Ready.
Communication (Select the network interface to use)
Select the interface to be used for network connection.
1
After entering the administrator ID and password, press  or 
repeatedly until >Communication appears.
2
Press [OK]. A blinking question mark (?) appears.
3
Press  or  to select the desired NIC.
Standard NIC (standard network interface of the printer)
Option NIC (optional network interface kit)
4
Press [OK].
5
Press [MENU]. The display returns to Ready.
7-53