Printing A Network Interface Status Page - Kyocera ECOSYS P2135dn Operation Manual

Adjust/Maintenance
>>Print
Network Status Page?
4-6

Printing a Network Interface Status Page

You can print out a status page for the network interface. The network
status page shows the network addresses, and other information under
various network protocols about the network interface.
Adjust/Maintenance
Adjust/Maintenance is used to adjust the print quality and to carry out
printer maintenance.
The options available in Adjust/Maintenance are as follows:
• Restart Printer
• Service
IMPORTANT Service is primarily a menu used by service
representative for maintenance work. There is no need for customers
to use this menu.
1
Press [MENU].
2
Press  or  repeatedly until Adjust/Maintenance > appears.
>
3
Press  while Adjust/Maintenance > is displayed.
4
Press  or  repeatedly until >Service > appears.
5
Press .
6
Press  or  repeatedly until >>Print Network Status Page
appears.
7
Press [OK]. A question mark (?) appears.
8
Press [OK]. Processing appears and a status page is printed out.
9
When printing ends, the display returns to Ready.
Connecting and Printing