Kyocera ECOSYS P2135dn Operation Manual page 128

>>Unit
? mm
>>X Dimension
7-22
Statement
Folio
Note A6 and Statement are displayed for Cassette
Size or Cassette 1 Size.
5
When the desired paper size is displayed, press [OK]. The paper
size is set for the paper cassette.
If you selected Custom in step 4, be sure to set the unit of
measurement and the dimensions of the paper as described in the
following sections.
Select the units of measurement as described in the next section.
Unit (Selecting the unit of measurement)
1
Press .
2
Press  or  repeatedly until >>Unit appears. The unit of
measurement can be selected between millimeters and inches. The
current unit of measurement is displayed (the default setting is mm).
3
Press [OK]. A blinking question mark (?) appears.
4
Select mm or inch using  or .
5
Press [OK].
Set the dimensions of the paper as described in the next section.
Entering the Width and Length
Enter the paper size for X Dimension and Y Dimension as shown in
the figure.
105 to 216mm
(4-1/8 to 8-1/2 inches)
1
When the unit of measurement is set, press .
>>X Dimension appears (the paper width setting).
2
Press [OK]. A blinking cursor (_) appears.
216 mm
X Dimension
Using the Operation Panel