Table of Contents
Advertisement
Display Orientation
Dimming Curve
Dimming Speed
Color Balance
Intimidator™ Wash Zoom 350 IRC User Manual Rev. 1
The display can show the screen in two directions, one for when the fixture is standing and
one for when it is mounted upside-down.
To set the display orientation, do the following:
1. Press <MENU> repeatedly until 4 icons show on the display.
2. Use <UP> or <DOWN> to highlight the Setup icon.
3. Press <ENTER>. The Setup options will show on the display.
4. Use <UP> or <DOWN> to highlight the Screen Rev option.
5. Press <ENTER>. The words ON or OFF will show in green.
6. Use <UP> or <DOWN> to switch between ON (upside-down display) and
OFF (normal display).
7. Press <ENTER> to select the setting.
The dimming curve can be adjusted to change how the light brightens and dims. If the
factory default is not a suitable setting, and the dimming curve of this light needs to match
more closely to that of another light, adjust this setting as follows.
To adjust the dimming curve, do the following:
1. Press <MENU> repeatedly until 4 icons show on the display.
2. Use <UP> or <DOWN> to highlight the Setup icon.
3. Press <ENTER>. The Setup options will show on the display.
4. Use <UP> or <DOWN> to highlight the Dimmer Curve option.
5. Press <ENTER> and Square, I Squa, SCurve, or Linear will show in green.
6. Use <UP> or <DOWN> to select the desired option.
7. Press <ENTER> to select the setting.
The dimming speed can be adjusted to change how quickly the light brightens and dims. If
the factory default is not a suitable setting, and the dimming speed of this light needs to
match more closely to that of another light, adjust this setting as follows.
To adjust the dimming speed, do the following:
1. Press <MENU> repeatedly until 4 icons show on the display.
2. Use <UP> or <DOWN> to highlight the Setup icon.
3. Press <ENTER>. The Setup options will show on the display.
4. Use <UP> or <DOWN> to highlight the Dimmer Speed option.
5. Press <ENTER> and Fast or Smooth will show in green.
6. Use <UP> or <DOWN> to switch between Fast and Smooth.
7. Press <ENTER> to select the setting.
The color balance setting is used to set the white color of the product. This setting affects
only the color of the white light of the LED. The red, green, and blue colors will remain the
same.
To adjust the color balance, do the following:
1. Press <MENU> repeatedly until 4 icons show on the display.
2. Use <UP> or <DOWN> to highlight the Setup icon.
3. Press <ENTER>. The Setup options will show on the display.
4. Use <UP> or <DOWN> to highlight the Color Balance option.
5. Press <ENTER>. The product will begin emitting light and the Color Balance options will
show on the display.
6. Use <UP> or <DOWN> to highlight the color to be adjusted.
7. Press <ENTER>. The number to the right will show in green
8. Use <UP> or <DOWN> to select a value between 100 and 255. The higher the number,
the more of the color is included in the white setting.
9. Press <ENTER> to select the value setting.
10. Repeat steps 6 through 9 to adjust the remaining colors until the desired white color is
emitted from the product.
Upon entering the color balance menu, the product will emit a white light. After
exiting the color balancing menu, the product will return to the currently selected
operations mode. If there is no activity for 30 seconds, the product will exit the color
balance menu and return to the currently selected operations mode.
Page 26 of 31
Advertisement
Table of Contents
