Table of Contents
Advertisement
Mounting
Orientation
Rigging
Procedure
Mounting Diagram
Rogue™ R1 Wash User Manual Rev. 2
Before mounting this product, read and follow the
Professional line of mounting clamps, go to http://trusst.com/products/.
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Chauvet recommends using the following general guidelines when mounting this product.
·
When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
·
Make sure to mount this product away from any flammable material as indicated in the
Safety
Notes.
·
Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
·
If hanging this product, make sure that the mounting location can support the product's
weight. See the
Technical Specifications
product.
·
When hanging this product, always secure to a fastening device using a safety cable.
The Rogue™ R1 Wash comes with a preinstalled mounting surface to which you will be able to
attach the included omega bracket. Make sure the clamps are capable of supporting the weight
of this product. Use at least 1 mounting point per product. In addition, use a safety cable to link
the product to the structure.
Floor Mounting
for the weight-bearing requirements of this
Mounting Clamp
Omega Bracket
Mounting
Surface
Overhead Mounting
Safety
Notes. For our CHAUVET®
Safety Cable
Setup
-7-
Advertisement
Table of Contents
