Table of Contents
Advertisement
5. T
ECHNICAL
Product
Maintenance
Intimidator™ Wash Zoom 350 IRC User Manual Rev. 1
I
NFORMATION
Dust build-up on the lens reduces light output. Dust build-up on the body and fans can
cause overheating and mechanical wear, which can reduce the usable life of the product.
To maintain optimum performance and minimal wear in a normal environment, clean the
product at least twice a month. If the environment is particularly dusty, clean the product
more often.
For best results follow the suggestions listed below:
· Never clean the product when it is plugged into a power source.
· Only clean the product when it is at room temperature.
· Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the
external surfaces and in the vents.
· Use a mild soap solution, ammonia-free glass cleaner, or isopropyl alcohol to clean all
the external optics and glass or transparent surfaces.
· Apply the cleaning solution directly to a soft, lint-free cotton cloth or a lens cleaning
tissue.
· Gently wipe dirt and grime to the outside edges of the external optics and glass or
transparent surfaces.
· Gently polish the external optics and glass or transparent surfaces until they are free of
haze and lint.
Always dry the external optics and glass/transparent surfaces carefully after cleaning
them.
Do not spin the cooling fans while blowing compressed air into them.
Page 28 of 31
Advertisement
Table of Contents
