Adjusting The Rear Shock Absorber Assembly - Yamaha FZ1-N Service Manual

▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
EAS21620
ADJUSTING THE REAR SHOCK
ABSORBER ASSEMBLY
EWA13120
WARNING
Securely support the vehicle so that there
is no danger of it falling over.
Spring preload
ECA13590
CAUTION:
Never go beyond the maximum or minimum
adjustment positions.
1. Adjust:
• Spring preload
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Adjust the spring preload with the special
wrench and extension bar included in the
owner's tool kit.
b. Turn the adjusting ring "1" in direction "a" or
"b".
c. Align the desired position on the adjusting
ring with the stopper "2"
Direction "a"
Spring preload is increased
(suspension is harder).
Direction "b"
Spring preload is decreased
(suspension is softer).
Spring preload adjusting posi-
tions
Minimum
1
Standard
3
Maximum
7
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
Rebound damping
ECA13590
CAUTION:
Never go beyond the maximum or minimum
adjustment positions.
1. Adjust:
• Rebound damping
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Turn the adjusting screw "1" in direction "a"
or "b".
Direction "a"
Rebound damping is increased
(suspension is harder).
Direction "b"
Rebound damping is decreased
(suspension is softer).
Rebound
position
Minimum
12 clicks in direction: "b"*
Standard
6 clicks in direction: "b"*
Maximum
1 clicks in direction: "b"*
* With the adjusting screw fully turned-in
direction "a"
3-31
CHASSIS
damping adjusting