Removing The Clutch - Yamaha FZ1-N Service Manual

EAS25080

REMOVING THE CLUTCH

1. Remove:
• Clutch cover "1"
• Gasket
NOTE:
Loosen each bolt 1/4 of a turn at a time, in
stages and in a crisscross pattern.
After all of the bolts are fully loosened, remove
them.
2. Remove:
• Compression spring bolts "1"
• Compression springs
• Pressure plate "2"
• Pull rod "3"
3. Remove:
• Friction plate 1 "1"
4. Remove:
• Clutch plate 1 "1"
• Friction plate 2
5. Straighten the clutch boss nut rib "1".
6. Loosen:
• Clutch boss nut "1"
NOTE:
While holding the clutch boss "2" with the uni-
versal clutch holder "3", loosen the clutch boss
nut.
Universal clutch holder
90890-04086
YM-91042
7. Remove:
• Clutch boss nut
• Washer
• Clutch boss assembly
5-48
CLUTCH