EAS23720
INSTALLING THE ENGINE
1. Install:
• Right front engine mounting bolt 2 "1"
Refer to "CYLINDER HEAD" on page 5-19.
2. Tighten:
• Right front engine mounting bolt 2
Right front engine mounting
bolt 2
50 Nm (5.0 m·kg, 36 ft·lb)
3. Install:
• Engine mounting adjust bolts
(temporarily tighten)
4. Install:
• Engine
5. Install:
• Lower engine mounting bolt "1"
• Upper engine mounting bolt "2"
• Self-locking nuts
NOTE:
Do not fully tighten the bolts and nuts.
6. Install:
• Left front engine mounting bolt "1"
(temporarily tighten)
• Right front engine mounting bolt 1 "2"
(temporarily tighten)
7. Tighten:
• Engine mounting adjust bolts
Engine mounting adjust bolt
7 Nm (0.7 m·kg, 5.1 ft·lb)
NOTE:
Use the pivot shaft wrench "1" and pivot shaft
wrench adapter "2" to tighten the engine
mounting adjust bolts.
Pivot shaft wrench
90890-01518
Frame spanner socket
YM-01518
Pivot shaft wrench adapter
90890-01476
5-8
ENGINE REMOVAL