Yamaha FZ1-N Service Manual page 172

NOTE:
• Align the projections "a" on the handlebar
switch with the holes "b" in the handlebar.
• Threre should be 1–3 mm (0.04–0.12 in) of
clearance "c" between the handlebar grip
and the grip end.
10. Install:
• Front brake master cylinder assembly
• Front brake master cylinder holder "1"
Front brake master cylinder
bracket bolt
10 Nm (1.0 m·kg, 7.2 ft·lb)
ECS2D1010
CAUTION:
• Install the brake master cylinder bracket
with the "UP" mark facing up.
• First, tighten the upper bolt, then the
lower bolt.
NOTE:
Align the end of the brake master cylinder
holder with the punch mark "a" on the handle-
bar.
11. Adjust:
• Throttle cable free play
4-47
HANDLEBAR