Troubleshooting; Spare Parts - BeefEater Discovery 1100s Assembly And Operating Instructions Manual

Troubleshooting

Condition
Flame goes out while in use
Ignition failure
Foul smell of gas
Flame appear to separate off the
burner or flame burns with noise
Yellow Tipping in Flame

Spare Parts:

12
1100series Ins_Au_V0
Possible Cause
Empty Gas cylinder.
Air mixed in hoses.
Blockage
gas cylinder valve close
Air mixed in the hoses
Rubber hose wrapped, deformed
or pinched
Spark Escaping
No Spark
Damage to hose
Leakage
Burner went off
Incorrect combustion
blockage of burner Ports
Air/Gas mixture screw in burner
incorrect
Solution
Replace cylinder.
Re-ignite and allow operating for
a short while, till clears out
Seek professional assistance.
Turn off knob button, then open
the cylinder valve
Re-ignite and allow operating for
a short while, till clears out.
Release hose, ensure not
damaged or leaking
Ensure the spark probe is in
place, not deformed, clean.
Seek professional assistance.
Turn cylinder valve off, replace
hose.
Leak-test, and tighten where
required.
If leakage can't be rectified,
cease using appliance, and seek
professional assistance
Shut off valves, wait for 5
minutes and reignite
Seek professional assistance
Clean the burner thoroughly.
If problem persists, Seek
professional assistance
Try to open screw to remove
yellow. If not changing, seek
professional assistance