BeefEater 1500 Series Assembly And Operating Instructions Manual

BeefEater 1500 Series Assembly And Operating Instructions Manual

Mobile trolley models
Hide thumbs Also See for 1500 Series:

Advertisement

Quick Links

1500 SERIES
Assembly and Operating Instructions
MOBILE
TROLLEY MODELS BDM1530GAE,
BDM1540GAE & BDM1550GAE
FOR OUTDOOR USE ONLY
EUROPE
BMAN_Domino_Mobile_EU_Aug20

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1500 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for BeefEater 1500 Series

  • Page 1 1500 SERIES Assembly and Operating Instructions MOBILE TROLLEY MODELS BDM1530GAE, BDM1540GAE & BDM1550GAE FOR OUTDOOR USE ONLY EUROPE BMAN_Domino_Mobile_EU_Aug20...
  • Page 2: Table Of Contents

    Products must be used, installed and operated in accordance with this manual. You may not be able to claim on the BeefEater manufacturer’s warranty in the event that your product fault is due to failure to adhere this manual.
  • Page 3: Important Safety Instructions

    This appliance must be serviced only by a qualified IMPORTANT TIPS & INFORMATION licensed person. BeefEater Barbecues are approved for OUTDOOR USE ONLY Improper installation, adjustment, alteration or and must not be used in a building, garage or any other maintenance can cause injury or property damage and enclosed area.
  • Page 4 BeefEater dealer. The appliance is designed for use by adults, keep • Please only use BeefEater supplied hose(s) to connect children away from the barbecue at all times. this appliance. Natural Gas conversion kits are available from your nearest BeefEater dealer.
  • Page 5 IMPORTANT SAFETY INSTRUCTIONS • Move the appliance during use. IMPORTANT TIPS & INFORMATION • Obstruct any ventilation of barbecue or the cylinder. Should the appliance go out for any reason, turn off all • Allow the flexible gas supply hose or any electrical cord control knobs and the cylinder gas valve.
  • Page 6 Make connection as described in figures 1 and 2. Leak-test the connection with a soapy water solution. (See Gas Leak Testing Procedure). Hose and regulator replacement must be a genuine part specified for this appliance and is obtainable from your nearest BeefEater stockist. GAS CYLINDER SAFETY INFORMATION...
  • Page 7 LPG SAFETY INFORMATION LPG safety information • Use only gas cylinders, which meet national and regional codes. The minimum cylinder size for this barbecue is 6kg. Ensure that the cylinder can provide enough fuel to operate the appliance. If in doubt, check with your local gas supplier.
  • Page 8: Product Description

    PRODUCT DESCRIPTION 4 burner mobile barbecue shown BDB1540GA 4 burner built in barbeque Side panel LH & RH Door magnetic catch x 4 *BDB1530GA (3 burner) and BDB1550GA Side panel support LH & RH Door hinge bracket LH & RH (5 burner) barbeque models not shown Brace Grommet...
  • Page 9: Product Dimensions

    PRODUCT DIMENSIONS 1522mm 654mm 639mm 3 burner 1672mm 804mm 4 burner 755mm 1842mm 974mm 5 burner Hood and flip down control panel cover open DIMENSIONS...
  • Page 10 ASSEMBLING THE BARBEQUE Tools required: Fasteners supplied: M6 x 10mm M6 x 16mm M5 x 10mm M4 x 10mm 8 Fibre 43 off 8 off 12 off 4 off washers Important: ensure locking casters are fitted to the front of the trolley, with locks facing forward.
  • Page 11 ASSEMBLING THE BARBEQUE 4 x screws for LHS panel Repeat same assembly 4 x screws for process on right hand M5 x 10mm RHS panel side panel. Fit screws but do no tighten to position subsequent M6 x 10mm screws more easily. ASSEMBLING THE BARBECUE...
  • Page 12: Assembling The Barbecue

    ASSEMBLING THE BARBECUE Fit screws but do no tighten to position subsequent M6 x 10mm screws more easily. Fit screws but do no tighten to position subsequent M6 x 10mm screws more easily. ASSEMBLING THE BARBECUE...
  • Page 13 ASSEMBLING THE BARBECUE Repeat same assembly process on right hand hinge plate. 2 x screws for LHS panel 2 x screws for M5 x 10mm RHS panel Tighten all screws to secure M6 x 10mm all panels. ASSEMBLING THE BARBECUE...
  • Page 14 ASSEMBLING THE BARBECUE 5 Burner model only M4 x 10mm ASSEMBLING THE BARBECUE...
  • Page 15 ASSEMBLING THE BARBECUE M6 x 10mm First fit lower door pin into the hole on the base assembly. Then depress the upper door pin with your finger, line up with the hole above on the separator panel, and release to allow the pin into the hole. ASSEMBLING THE BARBECUE...
  • Page 16 ASSEMBLING THE BARBECUE Repeat same assembly process on right hand side. M6 x 10mm 2 x screws for LHS panel 2 x screws for RHS panel ASSEMBLING THE BARBECUE...
  • Page 17 ASSEMBLING THE BARBECUE Repeat same assembly process on right hand side. M6 x 10mm Repeat same assembly process on right hand side. M6 x 10mm ASSEMBLING THE BARBECUE...
  • Page 18 ASSEMBLING THE BARBECUE Left hand side table and support bracket assembly. M6 x 16mm Right hand side table or side burner and support bracket assembly. M6 x 16mm ASSEMBLING THE BARBECUE...
  • Page 19 ASSEMBLING THE BARBECUE Disregard this step for side burner models. (go to page 16 step 2) WARNING IMPORTANT After completing the gas hose connection to the gas bottle, conduct a leak test following the leak test procedure before using the appliance. (See leak test procedure on page 18) Gas bottle size •...
  • Page 20: Connecting The Side Burner

    CONNECTING THE SIDE BURNER WARNING WARNING ensure that the gas cylinder valve is closed and the gas regulator is disconnected from the gas cylinder before proceeding. Disconnect the gas hose and regulator assembly (A) from the BBQ using 2 spanners. CONNECTING THE SIDE BURNER...
  • Page 21 CONNECTING THE SIDE BURNER Connect the gas hose and regulator assembly (A) to the side burner connection using 2 spanners. Connect the gas hose (B) to the remaining connection on the side burner using 2 spanners. Connect the other side of gas hose (B) to the barbecue connection using 2 spanners CONNECTING THE SIDE BURNER...
  • Page 22 CONNECTING THE SIDE BURNER WARNING IMPORTANT After completing the gas hose connections, conduct a leak test following the leak test procedure before using the appliance. WARNING WARNING To ensure gas tight connections, complete the gas leak test procedure before and after gas hose connection and after every reconnection of the gas cylinder.
  • Page 23: Side Burner Operating Instructions

    SIDE BURNER OPERATING INSTRUCTIONS Control functions Manual lighting • In the event of the automatic ignition system not Before lighting the side burner: working, the barbecue can be lit manually • Check that all hoses and gas fittings are tight •...
  • Page 24: Locating Your Barbecue

    LOCATING YOUR BARBECUE Natural Gas Conversion Most importantly, this is an outdoor appliance. Ensure your barbecue is positioned safely away from anything that can Most newly purchased barbecues are made for LPG/ catch fire. propane. A natural gas conversion kit is available to allow your barbecue to run on Natural Gas.
  • Page 25 INSTALLATION OPTIONS WARNING WARNING Partial Enclosures This appliance shall only be used in an above ground, open air situation with natural ventilation, without stagnant areas, where gas leakage and products of combustion are rapidly dispersed by wind and natural convection. Failure to adhere to these installation instructions may cause injury or property damage and affect your ability to make a claim under the manufacturer’s warranty.
  • Page 26: Cleaning And Storing Your Barbecue

    Brushes specifically designed for this purpose can Gas cylinders must be stored outdoors, out of reach of be purchased from your BeefEater retailer. Wipe off children and must not be stored in a building, garage or any remaining residue with a paper towel.
  • Page 27: Maintenance

    This appliance should be checked and serviced by an authorised service person every 2 years to ensure the appliance remains in a safe operating condition. (These services are not covered by warranty).Replacement parts are available from your authorised BeefEater Dealer. Service and Maintenance Schedules Each Use 6 Monthly...
  • Page 28: Technical Information

    TECHNICAL INFORMATION 1500 SERIES 3 BURNER BBQ WITH SIDEBURNER BE,CH,CY,CZ, BE,CY,DK,EE, AT,CH,DE,SK AT,CH,CZ,DK, DE,LU, ES,FR,BG, GR, FR,GB,HU,IT, EE,ES,FI,FR, PL,RO IE,IT,LT,LU, LT,NL,NO,SE, GB,GR,HU,IE, COUNTRY LV,PT,SK,SI SI,SK,RO,HR, IT,LT,LV,NL, TR,BG,IS,LU, NO,PT,RO,SE, MT,FI SI,SK GAS CATEGORY 3+(28-30/37) 3B/P(30) 3B/P(50) GAS TYPE BUTANE PROPANE BUTANE...
  • Page 29 1500 SERIES 5 BURNER BBQ WITH SIDEBURNER BE,CH,CY,CZ, BE,CY,DK,EE, AT,CH,DE,SK AT,CH,CZ,DK, DE,LU, ES,FR,BG, GR, FR,GB,HU,IT, EE,ES,FI,FR, PL,RO IE,IT,LT,LU, LT,NL,NO,SE, GB,GR,HU,IE, COUNTRY LV,PT,SK,SI SI,SK,RO,HR, IT,LT,LV,NL, TR,BG,IS,LU, NO,PT,RO,SE, MT,FI SI,SK GAS CATEGORY 3+(28-30/37) 3B/P(30) 3B/P(50) GAS TYPE BUTANE PROPANE BUTANE PROPANE BUTANE...
  • Page 30: Troubleshooting

    TROUBLESHOOTING Condition Possible Cause Solution Empty gas cylinder Replace cylinder Air mixed in hoses Re-ignite and allow operating for a Flame goes out while in use short while, till clears out Blockage Seek professional assistance Gas cylinder valve close Turn off knob button, then open the cylinder valve Air mixed in the hoses Re-ignite and allow operating for a...
  • Page 31: Warranty

    Conditions of Warranty materials within the specified period from the date of purchase, 1. The appliance is delivered to the BeefEater distributor’s service department BeefEater or its distributor will repair or, (at distributors option), or authorised service agent and freight charges both ways are paid by the replace the defective part free of charge.
  • Page 32 For more information on all Beefeater products, or for dimension and installation information, call into your retailer, phone or email our customer care team or visit our website: EUROPE BeefEater Europe PO Box 1238 Cheddar BS27 9AH United Kingdom phone UK:...

This manual is also suitable for:

Bdm1530gaeBdm1540gaeBdm1550gae

Table of Contents