BeefEater Discovery Series Assembly And Operating Instructions Manual

BeefEater Discovery Series Assembly And Operating Instructions Manual

Discovery series barbecues for outdoor use only
Hide thumbs Also See for Discovery Series:

Advertisement

North America
Discovery Series Barbecues
Assembly And Operating Instructions
For outdoor use only

Advertisement

Table of Contents
loading

Summary of Contents for BeefEater Discovery Series

  • Page 1 North America Discovery Series Barbecues Assembly And Operating Instructions For outdoor use only...
  • Page 2: Safety Warnings

    Safety Warnings WARNING: instructions and observe the warnings provided in this operating manual could result in serious bodily injury or damage to property. Please read these instructions completely before assembly or operation of your barbecue. NOTE TO INSTALLER: For Your Safety 1.
  • Page 3 DO NOT • Lean over barbecue when lighting. • Leave cooking food unattended. • Delay lighting burners after turning gas on. • Spray or store aerosols in vicinity of barbecue while in operation. • Store combustible materials, gasoline or flammable liquids or vapours within 45 cm (18”) of barbecue.
  • Page 4: Assembly Instructions

    Assembly Instructions Before You Start Note the tools you will need before you begin. Remove any packaging material or protective plastic from components. Check for damaged or missing parts, and consult your retailer if necessary. Mobile trolleys are optional. You should follow the separate instructions that came with the trolley before assembling and installing your barbecue.
  • Page 5 Assembly Instructions Fit The Vaporizers The Vaporizers are designed to vaporise fats and juices from your food. The Vaporizers reduce flare-ups and help to add that great barbecue flavour. To install the Vaporizer(s), remove all plastic and/or cardboard packaging material and place the Vaporizer into position on the right hand side of the barbecue.
  • Page 6: Connection To Barbecue & Gas Supply

    Connection to Barbecue & Gas Supply Before You Begin If you have not done so already, check the gas type label as described on page 4. This appliance must not be installed under or on any combustible material. Minimum clearance from combustible materials to all sides of the appliance is 45 cm (18”).
  • Page 7 Connection to Barbecue & Gas Supply Disconnecting The Gas Supply Always ensure that all gas controls on the appliance and on the cylinder are off before disconnecting.or removing the gas cylinder. Do not smoke or use a naked flame near the appliance or gas cylinder while connecting or disconnecting the gas line.
  • Page 8: Using Your Barbecue

    • The hose and regulator supplied with this barbecue must be used at all times whilst operating this barbecue. Inspect the hose and regulator for cracks or any sign of wear or damage. If there is excessive abrasion or wear, replace only with a genuine BeefEater hose and regulator. Lighting The Barbecue Your barbecue is equipped with a safety feature that prevents the burners from being accidentally turned on.
  • Page 9: After Use

    Using Your Barbecue Preparing The Plates And Grills The porcelain enamel coated grills supplied with your barbecue do not require seasoning before they are used: simply wash them thoroughly with soapy water, dry, and place on the barbecue. To Turn Off The Burner Push in and hold the control knob while turning in a clockwise direction until the off position is reached.
  • Page 10: Getting The Most From Your Barbecue

    Getting The Most From Your Barbecue Preheating Your Barbecue Like an oven, preheating your barbecue before cooking produces better results. Because your hood retains heat so efficiently, preheating your barbecue is quicker with the hood down. Turn the outside two burners to high. Close the hood, and allow to preheat for about 8 minutes, Then reduce the burner settings to achieve and maintain the required temperature, by following these guidelines.
  • Page 11: Cleaning Your Barbecue

    • After use, remove all solid material from the cooking surfaces using a brass bristle brush or plastic scourer. Brushes specifically designed for this purpose can be purchased from your BeefEater retailer. Wipe off remaining residue with a paper towel.
  • Page 12: Service And Maintenance

    This appliance should be checked and serviced by an authorised service person every 2 years to ensure the appliance remains in a safe operating condition. (These services are not covered by warranty). Replacement parts are available from your authorised BeefEater Dealer Check all hoses for cracks and leaks...
  • Page 13: Technical Specifications

    Technical Specifications Barbecue Dimensions 245mm 19 3/8” 493mm 26” 660mm 32 1/8” 816mm 38 1/4” 973mm Built-in Dimensions 20 5/8” 27 1/8” 33 1/4” 39 1/2” Gas Consumption 523mm 690mm 846mm 1003mm BTU/hr MJ/hr 30 400 45 600 60 800 76 000 g/hr 13.3...
  • Page 14: Accessories Available

    Accessories Available Your retailer can advise on the range of BeefEater accessories available to help you take full advantage of the barbecue cooking opportunities available with your roasting hood. Apron and Mitt Set Chef Set BeefEater Sales International P.O. Box 450, Chester Hill, NSW, Australia 2162 Phone: +61 2 9755 7912 Facsimile: +61 2 9755 7913 E-mail: mail@beefeaterbbq.com...

This manual is also suitable for:

Discovery

Table of Contents

Save PDF