BeefEater Discovery i-1000 Assembly, Installation And Operating Instructions

BeefEater Discovery i-1000 Assembly, Installation And Operating Instructions

Discovery series barbecues

Advertisement

Discovery Series Barbecues
Assembly, Installation and Operating Instructions
AUSTRALIA
NEW ZEALAND
UNITED STATES
CANADA
Read these instructions completely before
assembly or operation of your barbecue.
Important:
BeefEater barbecues are approved for Outdoor
Use Only and must not be used in a building,
garage or any other enclosed area.
BeefEater barbecues must not be used in
recreational vehicles or boats.
Read instructions thoroughly before operating
this barbecue.
Save this manual for future reference.
Always use the barbecue on a level surface.
Some foods produce flammable fats and juices,
regular cleaning is essential.
Attend an operating barbecue at all times.
Damage caused by fat & grease fires is not
.
covered by warranty
When not in use keep barbecue dry and covered.
Polyester BBQ covers are an optional accessory
that will ensure years of trouble free operation.
For Your Safety
1. Do not store or use gasoline or other flammable
vapors or liquids in the vicinity of this or any other
appliance.
2. An LPG/Propane cylinder not connected for use
shall not be stored in the vicinity of this or any
other appliance.
For Your Safety
If you smell gas:
1. Shut off gas to the appliance
2. Extinguish any open flame.
3. Open lid.
4. If odour continues, immediately call your gas
supplier or your fire department.
9800958

Advertisement

Table of Contents
loading

Summary of Contents for BeefEater Discovery i-1000

  • Page 1 BeefEater barbecues are approved for Outdoor Use Only and must not be used in a building, garage or any other enclosed area. • BeefEater barbecues must not be used in recreational vehicles or boats. • Read instructions thoroughly before operating this barbecue.
  • Page 2: Table Of Contents

    Discovery Series Barbecues Assembly, Installation and Operating Instructions Please read these instructions completely before assembly or operation of your barbecue. Warning: We want you to enjoy your barbecuing experience - Failure to follow the instructions and observe the warnings provided in this operating manual could result in serious bodily injury or damage to property.
  • Page 3 Precautions and Warnings Do Not • Spanner tighten all gas fittings as per instructions. • Lean over barbecue when lighting. • Check all gas hoses and line connections for damage, • Leave cooking food unattended. cuts or cracks each time the appliance is to be used. •...
  • Page 4: Gas Cylinder Information

    National Standard of Canada, CAN/CSA - B339, Hose and Regulator replacement must be a genuine Cylinders, Spheres or Tubes for the transportation of BeefEater part specified for this appliance. This is dangerous goods. obtainable from your nearest BeefEater stockist.
  • Page 5: Assembly Instructions

    Assembly Instructions Assembly Procedure Barbecue Hood is prefitted at the factory but not shown in these assembly diagrams. NOTE: Before any assembly or installation is attempted check all components for damage. Your dealer or the manufacturer must be notified of any problems immediately before proceeding. For safety and convenience the barbecue main frame has been factory assembled requiring only the following simple steps for completion.
  • Page 6 Assembly Instructions Vaporiser C. Fit The Vaporiser Grids Fig 6 The Discovery series barbecue is supplied with a Vaporiser grid system. The vaporiser grid has been designed to maximise the performance of your Discovery barbecue by vaporising fats and juices from the meat. The Vaporiser reduces flare-ups and helps to add that great barbecue flavour.
  • Page 7: Installation Instructions

    NOT expose to the sun’s direct heat and DO NOT allow the hose to come in contact with the hot surface of the barbecue body. Do not use a gas hose if it has excessive wear, abrasions, or if the hose is cut or punctured. Always check the gas hose for cuts etc. before use. Always replace with a genuine BeefEater part.
  • Page 8: Operation Instructions

    Operation Instructions Lighting Procedure After Use Before Lighting Be sure to turn off all control knobs and cylinder valve (for Check that all gas hose fittings and connections are spanner Propane - LPG) or shut-off valve (for Natural Gas). tight. Gas regulators that are fitted with a hand tightening wheel should be checked to ensure that the connection Depress/push in before turning is secure.
  • Page 9 Operation Instructions Operating your BeefEater BBQ Lighting Important Note: Always open the roasting hood before Direct Cooking Method lighting the barbecue. (Direct cooking method not recommended for Light the outside burners, ie: one burner at each end of roasting) the barbecue. After lighting, close the hood and allow Commonly used for traditional barbecuing.
  • Page 10: Cleaning And Maintenance

    Brushes specifically designed for this purpose can be purchased from your BeefEater retailer. Wash regularly with warm soapy water or detergent using • Wipe off remaining residue with a paper towel.
  • Page 11: Burner Maintenance

    • To prevent rust from forming, the above seasoning or • Before each subsequent use, pre-heat your BeefEater curing process should be repeated frequently. for 10 minutes before cooking. Allow the unit to cool off and then remove any remains from previous cooking.
  • Page 12: Warning: Contact Your Local Municipality For Any Building

    Outdoor Installation Instructions Warning: Contact your local municipality for any building codes regulating the installation of outdoor barbecue appliances. Outdoor installations must conform to local codes or, in the absence of local codes, with the following. USA: National Fuel Gas Code, ANSI Z223.1/NFPA 54 CAN: B149.1 Natural Gas &...
  • Page 13: Specifications

    Specifications Model: BeefEater Discovery (i-1000) Series Approval Number 6308 ANSI Z21.58B 2002 Outdoor Cooking Appliance AS:4557 2001 Domestic Outdoor Gas Barbecues Discovery Chassis Dimensions (mm / inches) Overall Height - Overall Height - Height - BBQ BBQ and Hood BBQ and Hood -...
  • Page 14: Help Guide

    Help Guide Your BeefEater Barbecue has undergone a series of quality checking points prior to leaving the factory. Should you have a problem with your appliance please refer to the help guide below before calling your dealer or service person.
  • Page 15 Note: Rust should be removed by a scrub specified period from the date of purchase, Warranty Terms BeefEater or its distributor will repair or, (at pad and the surface coated with cooking Barbecue Frame 3 years oil. See owners manual – Caring for cast distributors option), replace the defective part free of charge..
  • Page 16: Bbq Accessories

    BeefEater Barbecue Accessories See your nearest BeefEater stockist for the full range of BeefEater barbecues and barbecue accessories Meat Thermometer Enamel Baking Dish 3 Piece Toolset Roast Rack Polyester BBQ Cover Spit Basket For information on spare parts, warranty and installation; see your nearest BeefEater...

Table of Contents