BeefEater SIGNATURE 2000ES MOBILE Series Assembly And Operating Instructions Manual

BeefEater SIGNATURE 2000ES MOBILE Series Assembly And Operating Instructions Manual

Advertisement

Quick Links

Assembly and Operating Instructions
FOR OUTDOOR USE ONLY
SIGNATURE
SERIES
2000ES MOBILE
MOBILE MODELS BSM2040SA, BSM2041SA,
BSM2050SA, BSM2051SA
TROLLEY MODELS BSTR2040SA,
BSTR2041SA, BSTR2050SA & BSTR2051SA
AUSTRALIA / NEW ZEALAND

Advertisement

Table of Contents
loading

Summary of Contents for BeefEater SIGNATURE 2000ES MOBILE Series

  • Page 1 SIGNATURE Assembly and Operating Instructions SERIES 2000ES MOBILE MOBILE MODELS BSM2040SA, BSM2041SA, BSM2050SA, BSM2051SA TROLLEY MODELS BSTR2040SA, BSTR2041SA, BSTR2050SA & BSTR2051SA AUSTRALIA / NEW ZEALAND FOR OUTDOOR USE ONLY...
  • Page 2: Table Of Contents

    • Do not use caustic or abrasive based cleaners on other appliance. not be able to claim on the BeefEater manufacturer’s the barbecue. warranty in the event that your product fault is due to An LPG cylinder not connected for use shall not be •...
  • Page 3: Product Description

    PRODUCT DESCRIPTION PRODUCT DESCRIPTION 4 burner mobile barbecue 5 burner mobile barbecue BSB2040SA built in barbecue x 1 Right hand side table Castors (2 x locking and BSB2050SA built in barbecue x 1 Right hand side table Castors (2 x locking and (selected models) x 1 2 x non-locking) (selected models) x 1...
  • Page 4: Product Dimensions

    PRODUCT DIMENSIONS ASSEMBLING THE BARBECUE 4 burner mobile barbecue Hood open Tools required: Fasteners supplied: 550mm 1601mm 25mm 817mm 45 x large head 4 x M6x20mm 2 x M3x10mm 4 x M5x60mm 8 x fibre washers M6x12mm IMPORTANT Ensure the locking type castors are fitted to the front of the trolley, with locks facing...
  • Page 5 ASSEMBLING THE BARBECUE ASSEMBLING THE BARBECUE Fit screws but do not tighten Fit screws but do not tighten Large head M6x12mm Large head M6x12mm to position subsequent to position subsequent screws more easily screws more easily Fit screws but do not tighten Tighten all screws to Large head M6x12mm Large head M6x12mm...
  • Page 6 ASSEMBLING THE BARBECUE ASSEMBLING THE BARBECUE Ensure plastic film is M5x60mm removed before assembling the doors First fit lower door pin into the hole on the base assembly. Then depress the upper door pin with your finger, line up with the hole above on the separator panel, and release to allow the pin into the hole.
  • Page 7 ASSEMBLING THE BARBECUE ASSEMBLING THE BARBECUE Ensure plastic film is Side table or removed before assembling side burner the side tables M6x20mm screw Fibre washer Large head M6x12mm Large head M6x12mm Fibre washer ASSEMBLING THE BARBECUE ASSEMBLING THE BARBECUE...
  • Page 8: Connecting The Side Burner (Selected Models Only)

    CONNECTING THE SIDE BURNER (SELECTED MODELS ONLY) ASSEMBLING THE BARBECUE Please note: the right hand side burner assembly is relevant to selected models only. If your barbecue comes with a right hand side table instead, please disregard the below instructions. W ARNING Ensure that the gas cylinder valve is closed and the gas...
  • Page 9 CONNECTING THE SIDE BURNER (SELECTED MODELS ONLY) CONNECTING THE SIDE BURNER (SELECTED MODELS ONLY) Connect the gas hose and regulator IMPORTANT assembly (A) to the side burner connection using 2 spanners. After completing the gas hose connection, conduct a leak test by following the instructions on page 18, before using the appliance.
  • Page 10: Leak Test Procedure

    SIDE BURNER OPERATING INSTRUCTIONS (SELECTED MODELS ONLY) LEAK TEST PROCEDURE Leak test procedure Please note: the right hand side burner assembly is relevant to selected models only. If your barbecue is fitted • Ensure all gas valves are in the ‘OFF’ position. •...
  • Page 11: Gas Specifications And Mobile Restraint

    GAS SPECIFICATIONS AND MOBILE RESTRAINT NOTES 4 BURNER 5 BURNER 4 BURNER 5 BURNER UNIVERSAL UNIVERSAL NATURAL NATURAL GAS TYPE Maximum gas consumption 84 MJ/h 101 MJ/h 83 MJ/h 100 MJ/h ø 1.15 mm ø 1.15 mm ø 1.90 mm ø...
  • Page 12: Notes

    (c) ‘ASC’ means Electrolux’s authorised serviced centres; (vii) incorrect, improper or inappropriate operation; (d) ‘BeefEater’ is the brand controlled by Electrolux Home Products Pty Ltd (viii) insect or vermin infestation; of 163 O’Riordan Street, Mascot NSW 2020, ABN 51 004 762 341 in...
  • Page 13 0800 436 245 email: customercare@electrolux.co.nz web: beefeaterbbq.com BeefEater. We are part of the Electrolux Family. To add a touch of professional inspiration to your home, visit electrolux.com.au © 2019 Electrolux Home Products Pty Ltd. ABN 51 004 762 341...

Table of Contents