Table of Contents
Advertisement
setup screen
NETWORK SETUP
To set the video transfer mode
You can control the transfer rate according to the video transfer mode and network speed.
1.
Select <Network> - <Streaming type>.
The Video Transfer setup window
appears.
2.
When done, click [Apply].
Your settings will be saved.
VNP streaming : You can set the
Samsung Protocol (VNP) for the streaming service.
-
Protocol : Select a video transfer protocol from TCP*, UDP (Unicast)*, and UDP
(Multicast)*.
Multicast backbone (MBone) is not supported; you can access the camera only in the
multicast local network environment.
RTP streaming : You can set the RTP Protocol or the streaming service.
-
Protocol : Select a video transfer protocol from UDP (Unicast) and UDP (Multicast).
To set the DDNS
DDNS is an abbreviation of Dynamic Domain Name Service that converts the IP address
of a camera into a general Host Name so that the user can easily remember it and enables
connecting a camera with a fixed Host Name even if the IP address of the camera may be
dynamically changed.
1.
Select <Network> - <DDNS>.
The DDNS setup window appears.
2.
When done, click [Apply].
Your settings will be saved.
M
For checking the DDNS address, refer to
"To check the DDNS address".
(page 42)
70_ setup screen
Advertisement
Table of Contents
