Table of Contents
Advertisement
Profi le : Select Baseline or Main for the H.264 profi ling method.
Entropy coding* : Reduces the compression loss due to encoding.
Motion estimation : Estimates the movement of pixels by determining the motion
vector.
J
If you set the profi le to Baseline, the entropy coding is available only for CAVLC*; if you set it to
MAIN, the entropy coding is available for both CAVLC* and CABAC*.
If you set WDR to <OFF>, or the resolution of MPEG4 video is other than 4CIF, De-Interlace of
MPEG4 codec will not be available.
2.
When done, click [Apply].
Your settings will be saved.
To configure the IP settings
1.
Select <Basic> - <IP>.
The IP setup window appears.
IP confi guration : Set the IP and port
settings for the camera.
-
IP type : Select one from <Static
IP>, <Dynamic IP>, and <PPPoE
IP>.
If you select <PPPoE IP>, you can
provide the optional ADSL IP and
password. However, the multicast items
(multicast address, port, TTL) for VNP
and RTP will disappear.
-
MAC address : Displays the
Ethernet MAC address.
This is used for creating a DDNS
address.
-
IP address : Displays the current IP
address.
-
Subnet mask : Displays the
<Subnet mask> for the set IP.
-
Gateway : Displays the <Gateway> for the set IP.
-
DNS server : Displays the DNS(Domain Name Service) server address.
-
HTTP webserver port : HTTP port used to access the camera via the web
browser. The default is 80(TCP).
-
Upload port (TCP) : Used to upgrade the software fi rmware, defaulted to 60004(TCP).
IPv6 confi guration : Obtains the IPv6 address to access the IPv6 network.
English _51
Advertisement
Table of Contents
