Table of Contents
Advertisement
installation & connection
INSTALATION
Removing the dome cover
1.
Hold down the bottom lock lever while removing the
cover with the other hand.
Removing the cover reveals the main unit and inner
cover.
2.
To fi x the camera position, hold down both hooks of the
inner cover while lifting it up.
Ceiling Mount
1.
Use the provided template to drill one hole for the
camera, and one for the screw (5 mm in diameter,
at least 35 mm in depth), and insert the plastic
anchor (HUR 5) to the end of the screw hole.
2.
Connect and arrange the necessary cables (power,
video, etc) lest that they should be damaged or
caught while installing the camera.
3.
Insert the camera assembly into the hole so that
it fi ts to the camera hole, and fi x the assembly
using the assembly screw tappings (TH,
M4xL30). (x3)
4.
Close the dome cover.
5.
Fix the cover to the main unit. Fit the protruding
part inside the cover into the corresponding hole
of the main unit, and turn the cover to fi x it.
14_ installation & connection
Advertisement
Table of Contents
