Samsung SND-3080CF User Manual page 24

camera setup
DAY/NIGHT
You can specify a recording mode according to the scene.
For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 20)
1. Select <CAMERA SET> - <DAY/NIGHT>.
2. Select a screen transition mode according to
the illumination, and set options as appropriate.
DAY : Fixed to DAY mode, regardless of the
scene.
NIGHT : Fixed to NIGHT mode, regardless
of the scene.
If BURST is set to <ON>, the burst signal will
output.
AUTO : According to the luminance, this will
switch DAY to NIGHT mode, or vice versa.
DAY NIGHT / NIGHT DAY : If set to
<AUTO>, you can specify the brightness
level triggering the mode switch between
DAY and NIGHT as well as the interval.
MASK AREA : If there exists a bright spot
light source in a night scene, you can specify
the size and position as needed.
Any excessively bright area in a night scene
will be masked.
24_ camera setup
AUTO AUTO
BURST
DAY DAY NIGHT NIGHT
BRIGHTNESS BRIGHTNESS
DWELL TIME DWELL TIME
NIGHT NIGHT DAY DAY
BRIGHTNESS BRIGHTNESS
DWELL TIME DWELL TIME
MASK AREA MASK AREA
MASK AREA MASK AREA
<SIZE>
<LOCATION> <LOCATION>
OFF
MID MID
2S 2S
MID MID
5S 5S
1 1 2 2