Table of Contents
Advertisement
CHECKING THE OBJECT COUNTING
1.
Go to <Setup> - <Object counting>
and select the <Enable> to set the
event rule.
For more information, refer to "To set the
object counting function" (page 64).
2.
Select the <MJPEG> for <Video
format> and press the [Refresh]
button in the browser.
3.
Check the Count Results for the Line
crossing or the Area Occupancy which
is displayed in the <Object counting>.
Line In : If you draw a straight line from top(left) to bottom(right) to set the Line
Crossing, the number of objects that cross the straight line from left(bottom) to
right(top) is displayed. Or if you draw straight line from bottom(right) to top(left)
to set the Line Crossing, the number of objects that cross the straight line from
right(top) to left(bottom) is displayed.
Line Out : If you draw a straight line from top(left) to bottom(right) to set the Line
Crossing, the number of objects that cross the straight line from right(top) to
left(bottom) is displayed. Or if you draw straight line from bottom(right) to top(left)
to set the Line Crossing, the number of objects that cross the straight line from
left(bottom) to right(top) is displayed.
Area : Displays the number of objects appeared in the polygon which is drawn in
the Area Occupancy confi guration screen.
M
The <Line In> and <Line Out> display the data accumulated before resetting.
They are reset to 0 when the volume of the accumulated data reaches 10,000,000.
The <Area Counting> displays the average data during the <Area Counting Interval>.
To reset the Object Counting, click the <Reset> button.
The number displayed in <Line In> and <Line Out> is reset to 0.
The number displayed in the <Area> is updated every object counting interval selected in the
Object Counting Confi guration.
English _47
Advertisement
Table of Contents
