Table of Contents
Advertisement
overview
Inside
Item
Network Port
Alarm In / Out
terminals
SD Memory Card
Compartment
Reset Button
12_ overview
Used to connect a PoE or LAN cable.
Alarm in/out terminals can be confi gured as follows:
- ALARM IN : Terminal for Alarm Input.
- ALARM OUT : Terminal for Alarm Output.
- GND : Grounding terminal.
Compartment for the SD memory card.
Resets the camera settings.
Press the button for about 3 seconds, and the system indicator turns off
and will restart.
J
Resetting the camera requires reconfi guration of network settings (IP
address, subnet mask, gateway address etc.) using the IP Installer
software application.
3
4
Description
Advertisement
Table of Contents
