Table of Contents
Advertisement
SETTINGS Menus (Continued)
SPEAKERS Menu - SIZE
This menu allows you to enter the size of your speakers. The bass
management of the DMC-1 will then automatically assign each
speaker a frequency range based on your preferences. For full
range speakers with low frequency capabilities, you will
probably choose LARGE. In the case that speakers are not
capable of full range duty, choosing the SMALL setting will
engage a high pass crossover point at the point which is
chosen for the subwoofer. When SMALL is chosen,
the low frequency range is sent to the subwoofer.
See pages 60 and 63 for more details on bass
Select LARGE for any speakers which are capable
of good bass performance. Frequency response will
be FULL RANGE.
Select SMALL for any speakers such as satellites
with 5 or 6 inch woofers. They will then receive the
higher frequency range above the crossover point
selected for the subwoofer. Remember that if you
are not completely sure (or if you choose to play it
safe at first) you can select this setting to get things
started and see how much (if anything) is missing
from the audio signal content in the MAIN speak-
ers.
SIDE-AXIS Speakers
Select LARGE for any speakers which are capable
of good bass performance. Frequency response will
be FULL RANGE.
Select SMALL for any speakers such as satellites
with 5 or 6 inch woofers. They will then receive the
management and information regarding the ad-
justment of the bass management crossover
point.
MAIN Speakers
Page 56
Advertisement
Table of Contents
