Connecting To The Tv Or Projector Using Component Video - Emotiva DMC-1 User Manual

Connecting to the TV or Projector using Component Video

This configuration shows the DMC-1 connections to the "main" video display where video
output is taken from the Component Video outputs (the Red/Blue/Green trio) labeled "MAIN"
on the back panel of the DMC-1.
De sig
ne d in
Bu ilt wi US A
th pr ide
in Ch ina
1
1
COMPONENT VIDEO Input on the TV
or Projector. There may be more than one
input on high end video screens
This configuration will give the best picture quality, especially if the video source component
output begins as a native Component Video output. Remember that with the video transcoding
feature, the DMC-1 will still allow your Composite or S-Video source inputs to up convert to
the Component Video outputs, but you should always connect the highest quality video signal
available.
Page 28