Features Of The Dmc-1 A/V Controller - Emotiva DMC-1 User Manual

Features of the DMC-1 A/V Controller

• 24-bit Crystal Semiconductor ® Analog to Digital converter
®
• 24-bit, 192 kHz Analog Devices Digital to Analog converters
• 32-bit, 20 MHz control microprocessor
TM
• 24-bit, 150 MIPS Motorola Symphony DSP processor
• AM/FM tuner with 40 presets
• Digital Domain Treble and Bass tone controls
® ® ®
• Dolby Digital EX , Dolby Pro Logic II , and Pro Logic IIx decoding modes
® ®
• DTS ES and DTS NEO:6 decoding modes
• DSP "simulated" surround mode for enhancement of two channel sources
• Supports all digital sampling rates to 96 kHz
• Direct 2-channel analog bypass mode
• Gold plated input and output connectors
• Balanced XLR outputs and unbalanced RCA outputs
• Six A/V inputs, each with audio, S-video and composite video
• Three A/V outputs, each with audio, S-video and composite video
• 8 channel analog input with separate RCA connectors for DVD-Audio format
• Three component video inputs and two component video outputs
• Automatic video format transcoder up converts Composite and S-Video source to Compo-
nent Video
• Six coaxial and four optical digital inputs
• Coaxial and optical digital outputs (including from analog and downmixed 5.1 sources)
• Three audio only inputs, including MM Phono
• Two Tape record outputs
• Record outputs feature down mixed 2 channel output from a 5.1 digital source
• Four subwoofer outputs
• 7.1 channel outputs plus stereo side outputs for a total of 9.1 channels
• "Party Mode" for 2 channel playback through all speakers
• Zone 2 can play sources independent of the Main Zone
• Trigger outputs for both zones
• IR control of both zones, with rear IR ports and discrete codes
• On Screen Display (OSD)
• Flash memory upgradable through RS-232 port
• IEEE 1394 "Fire Wire" port for future expansion
• RS-232 control port with discrete codes
• Steel chassis with milled aluminum "floating wing" faceplate and cobalt blue illumination
• IEC standard 2 prong removable power cord
Page 13