Settings Menus; Main Zone Menu; Zone 2 Menu - Emotiva DMC-1 User Manual

SETTINGS Menus

MAIN ZONE Menu

Power Up Source
This sets the input source which the EMO button will then always
select whenever the DMC-1 is turned on.
Power Up Volume Mode
This lets you choose the volume level the DMC-1 reaches
when it is turned on. You can select from a PRESET level,
set below (the power-up volume), or it can play at the LAST
level it was playing before it was turned off. The DMC-
1 will always turn on at the level set here, but it can
be adjusted to any level afterwards.
Power Up Volume
This allows you to set the PRESET volume level
mentioned above. You might want to set it to a low
level to avoid any surprises upon turn-on, especially
if other users like loud music.
Max Volume
The volume can be set to not exceed a certain level
chosen by you. This is useful if you have sensitive
speakers, sensitive neighbors, or you would rather
not have others play your system too loud. Finally, a
smart preamplifier where YOU can police the volume
without even being there!

ZONE 2 Menu

These settings are like those described for the Main Zone. In
addition, the entire Zone 2 can be enabled or disabled, and the
stereo balance adjusted with this menu.
The Power Up Volume has three options: PRESET, LAST
and FIXED. The FIXED option allows you to set the Zone 2
to a fixed volume, not adjustable with the remote. PRESET
and LAST are as described for the Main Zone.
Page 55