Table of Contents
Advertisement
The On-Screen Display (OSD) Functions
Video Connections
The On Screen Display (OSD) function is present at the MAIN Composite Video, S-Video, or
Component Video outputs. It is also present at the output labeled VID2/MON2, but only if it is
set to MON2 in the programming steps using the OSD. Make sure that your TV monitor's
video input is connected correctly to one of these outputs.
OSD Activation
The OSD is activated using the remote's MENU button (with the remote set to operate the
EMO function). The joystick pad and surrounding buttons allow you to navigate through the
OSD menus to control and customize many features of the DMC-1.
Press EXIT to quit the OSD at any time. Any changes you make will be saved.
Note that the DMC-1 front panel display shows abbreviated text when the OSD is activated.
Quick Access to Information
Pressing INFO at any time will bring up a short description of the source you are listening to.
For example if you are listening to a DVD, the TV display might show:
What this means is that DVD is the selected input and the signal type is DIGITAL. The sample
rate of the signal is 48kHz and the decoding mode is registered as DTS is the mode, 5.1 is the
input format, 5.1 is the output (i.e. five speakers and a subwoofer).
DVD
DIGITAL
DTS 5.1 / 5.1
48K
Page 50
Advertisement
Table of Contents
