1-Piece Surround Panel; Routing The Power Cord; Installation - Travis Industries 31 DVI GSB2 Owner's Manual

Installation (for qualified installers only)

1-Piece Surround Panel


DVS – 25" by 38"

DVS – 28-1/2" by 40"
NOTE: The panels may be cut down in size and placed within the fireplace opening.

Routing the Power Cord

Because this panel fits flush against the fireplace facing, the panel does not have a notch allowing the power
cord to exit the fireplace. We recommend using the insert wiring kit (sku 97200315) to route power to the
insert. Otherwise, route the power cord behind the panel to the right side (the panel or fireplace may be
notched, if required).

Installation

1. Attach the mounting brackets as shown below.
2. Attach the surround panel as shown below.
© Travis Industries
96100318
96100324
4140813
19
100-01296