12
Fireplace Insert Installation
Surround Panel Installation
SKUs
Custom Panel 96100593
Small Panel 96100440
Medium Panel 96100441
Packing List
Panel
(2) Panel Mounting Brackets
(6) 10-24 Pan Head Screws
Drill Bit
Installation
1. The insert should be in position, but pulled out slightly to allow access to the sides and top of the
insert.
2. Attach the side brackets to the side of the insert using the pan head screws and nuts included
with the insert (note how the screws install from the inside – see illustration below).
© Travis Industries
(for qualified installers only)
Height
Custom
28.5"
30.5"
(6) 10-24 Nuts
(4) 10-24 Thread Forming Screws (Hex Head)
(2) Leveling Bolts (for leveling the insert in the
fireplace)
100-01434
Width
Custom
40"
42"
Attach the brackets with the
screws and nuts (included
with the stove).
5/16" Nutdriver
4151218