Operating The Computer - LifeGear 40115 Owner's Manual

OPERATING
SPECIFICATIONS:
TIME (TMR) ------------------------------------------ 00:00-99:59 MIN: SEC
SPEED (SPD) --------------------------------------- 0.0-999.9 KM/H
DISTANCE (DST) ----------------------------------- 0.00-99.99 KM
CALORIES (CAL) ----------------------------------- 0-9999 KCAL
FUNCTIONS AND OPERATIONS:
AUTO ON /OFF: When you start to exercise or press MODE button on the computer, the
computer will turn on. If you leave the equipment for 4 minutes, the power will turn off
automatically.
SCAN: Press MODE button until SCAN appears on the screen; the computer will
automatically scan the function every 5 seconds.
TIME (TMR): Press MODE button until TMR appears on the screen; the computer will
display your elapsed workout time in minutes and seconds.
SPEED (SPD): Press MODE button until SPD appears on the screen; the computer will
display the current training speed.
DISTANCE (DST): Press MODE button until DIST appears on the screen; the computer will
display the accumulative distance traveled during workout.
CALORIES (CAL): Press MODE button until CAL appears on the screen; the computer will
display the total accumulated calories burned during workout.
RESET: Press and hold MODE button for 3 seconds, all data values will clear to zero.
HOW TO INSTALL THE BATTERIES:
1. Remove the battery cover at the rear of computer.
2. Place two "SIZE-AA" batteries into the battery housing.
3. Insure batteries are correctly positioned and battery springs are proper contact with
batteries.
4. Re-install the battery cover.
5. If the display is illegible or only partial segment appear, remove batteries and wait 15
seconds before reinstalling.
THE COMPUTER
3