Adjustment - LifeGear 40115 Owner's Manual

ADJUSTMENT

Rear Roller Adjustment Bolt
Adjusting the Running Belt
The Running Belt is adjusted at the factory; it may come loose during transportation and
from use. After prolong use of running, the belt will stretch out. If the Running Belt is
shifting to the left, using the Allen Wrench provided, turn the left Rear Roller Adjustment
Bolt 1/4 turn in a clockwise direction. Try running again; you should see the belt start to
correct itself by moving back toward the center. Repeat the above procedure until the
running belt is centered. If the Running Belt is shifting to the right, using the Allen Wrench
provided, turn the right Rear Roller Adjustment Bolt 1/4 turn in the clockwise direction. Try
running again; you should see the belt start to correct itself by moving back toward the
center. Repeat the above procedure until the running belt is centered. If the Running Belt
is slipping during use, using the Allen Wrench provided, turn both left and right Rear Roller
Adjustment Bolts 1/4 turn in the clockwise direction for the same distance, you should now
walk on to the running belt to determine if the Running Belt is still slipping. Repeat the
above procedure until the Running Belt is not slipping.
12