Operating The Computer - LifeGear ACACIA PRO Owner's Manual

OPERATING THE COMPUTER

Flip the Master Power Switch that is located at the front of the treadmill to the ON position.
Before beginning a workout session ensure that the Safety Tether Key is properly placed
onto the Computer Console and the Safety Clip is securely attached to an article of your
clothing.
NOTE: Always stand on the side rails when you start the treadmill,
never start the treadmill while you are standing on the running belt.
QUICK START:
Press the START button on the computer to begin exercising, the computer screen will
countdown 5 seconds before the running belt starts moving. The running belt starts
moving with an initial speed of 1.0 KPH. You may press the SPEED + or SPEED - button
on the computer console to increase or decrease the running speed during exercise. The
the split window of SPEED will display your current running speed from the minimum
1.0 KPH to the maximum 14.0 KPH. You may also press one of the INSTANT SPEED
buttons (3 / 6 / 9 / 12) on the computer console and the split window of SPEED will
display the speed that you have pressed and the running speed will change to 3 KPH,
6 KPH, 9 KPH, or 12 KPH respectively. You may press the INCLINE ∧ or INCLINE ∨
button on the computer console to increase or decrease the incline level during exercise.
Each increment or decrement is 1 level. The incline adjustment available range is from 0
to 15 levels. The computer screen will display the incline level. You may also press one
of the INSTANT INCLINE buttons (2 / 4 / 8 / 12) on the computer console and the
computer screen will display the incline level that you have pressed and the incline level
will change to 2-level, 4-level, 8-level, or 12-level respectively. The split window of TIME
will display your elapsed workout time in minutes and seconds. The split window of DIS
(DISTANCE) will display the accumulative distance travelled during workout. The split
window of CAL (CALORIES) will display the total accumulated calories burned during
workout. The split window of PULSE will display your current heart rate in beats per
minute (BPM). To activate, grip the hand pulse sensors on both handlebars during
exercise and the pulse will display after 2-5 seconds. For a more accurate reading, grip
pulse sensors with both hands. During workout, you may press the STOP button on the
computer console to end your workout at any time.
FUNCTION BUTTONS:
START (GREEN BUTTON): Press the START button to begin exercising.
STOP (RED BUTTON): Press the STOP button to end your workout.
16