Nokia A032 User Manual page 98

Command
dhcp
dhcp+
disable LAN
disable radio
exit
log dump
log clear
logout
isp dial
isp hangup
nat
nat+
ppp
nid
92
Displays current DHCP settings:
• Address range – the current range of addresses available
• Number in range – the number of addresses available within
that range
This provides the same information as the dhcp command, but
shows the settings as they will be after the next restart.
Disables the wired LAN interface. Once disabled, you can only
reenable the interface by restarting the Nokia A032.
Disables the radio interface. Once disabled, you can only reenable
the interface by restarting the Nokia A032.
Performs a logout from the command line (and is functionally
identical to the logout command). For a telnet connection, it also
disconnects the telnet session. On the serial port, it returns to a
login prompt.
Displays the contents of the initialization log on the screen (you'll
find more on this in Appendix F).
Clears out the log information.
Exits the CLM. Re-enter the password to use CLM.
Forces the modem to dial up to the ISP.
Forces the modem to hang up.
Displays current NAT settings:
• NAT port
• External IP Address
• External DNS Address (1 & 2)
• NAT holes (IP addresses for external access – see page 201)
This works like the nat command but shows the settings that will
take effect on the next restart.
Displays current settings and statistics for PPP. The information
displayed here is similar to that generated in the PPP Statistics web
screen (see page 16).
The command is fully described in NID naming and security on
nid
page 97.
Description
Nokia A032 Advanced User Guide