Nokia A032 User Manual page 81

Wireless lan access point
Hide thumbs Also See for A032:
Table of Contents

Advertisement

Parameter
channel
Specifies the operating channel for the Nokia A032.
domain
Sets the operating area and enables valid channels.
rts_threshold
Determines whether RTS/CTS frames should be sent
on the wireless link and what size frames they
should be used for. Frames larger than the
parameter value will be preceded by an RTS/CTS
exchange.
short_retry
Specifies the number of retries the radio will use
during an RTS/CTS attempt before aborting.
long_retry
Specifies the number of retries the radio will use
during a data transmission attempt before aborting.
sifs_time
SIFS is an IEEE802.11 parameter which affects
turnaround time. The value is specified in IEEE802.1
and the normal setting for this parameter is 0. A
value of 0 is treated as default and causes the
system to use the IEEE802.11 compatible value. In
some special applications where IEEE802.11 is not
required an alternate value may be specified. It is
highly recommended that the default value be
used unless you have expert advice.
frag_threshold frag_threshold is an IEEE802.11 parameter which
determines the maximum size of frames sent by the
radio. Frames larger than frag_threshold are sent in
several pieces.
Lowering the value of frag_threshold can improve
throughput for poor radio conditions, but reduces
throughput for good radio conditions.
Command line interface
Radio-related
Description
Default
10
depends on
where unit
was
purchased
2301
15
15
0
2346
75

Advertisement

Table of Contents
loading

Table of Contents