Nokia A032 User Manual page 58

Option
Require Encrypted
Logon
Modem Speed
Use Logon Script
Modem Setup String
Inactivity Timer
Clear on Rcv
52
If checked, the A032 will refuse to log on to ISPs which
do not support encrypted log-on (i.e. PPP-MD5CHAP).
If this option is disabled, and your ISP doesn't support
encrypted logons, the A032 may use a less secure
method (PAP) in which the username and password are
sent in clear text format.
Specifies the data rate used to communicate between
the Nokia A032 and a modem. Note that this is not
necessarily the rate that the modem will support when it
communicates to the ISP. Generally the modem will not
connect at a speed higher than this rate but it may
connect at a speed which is lower.
This check box informs the A032 that it must use a logon
script in order to connect to the network. When this box
is checked you must configure the script using the Set
Logon Script sub-screen (see page 55).
This allows you to send commands to the modem prior
to dialing. Typically these would be AT commands to set
various modes and options. Most modems do not require
any special setup to operate.
This determines how many minutes of inactivity are
allowed before the modem connection is dropped. The
default is 3 minutes.
This is related to the Inactivity timer. It determines
whether received frames (i.e. from the ISP to the Access
Point) are considered to be 'activity'. It is off by default,
preventing the problem where the link is kept up
indefinitely due to spurious frames sent from the ISP to
the account.
The only time it may be necessary to set this checkbox is
if you are using a non-acknowledged download such as
a UDP multicast session for real time video.
Description
Nokia A032 Advanced User Guide