Nokia A032 User Manual page 89

Parameter
wep_key_range
wep_key
Command line interface
Description
Sets WEP key policy (see Setting WEP key policy
on page 138).
Command takes the form:
set wep_key_range min max
where min and max show the encryption
strengths, and can take the following values:
enter keys ten octets
40
56 enter keys as 14 octets
64 enter keys as 16 octets
96 enter keys as 24 octets
enter keys as 32 octets
128
For example:
set wep_key_range 56 96
means the Access Point will accept 56, 64 or 96-
bit keys (custom mode).
You can also use the following versions of the
command:
set wep_key_range normal
which means the Access Point will only accept
40-bit keys
set wep_key_range high
which means the Access Point will only accept
128-bit keys (strong mode).
Assigns a key value to one of the four shared
WEP keys. The command takes the form:
set wep_key n key
where selects which shared WEP key (1, 2, 3 or
n
4) is being entered, and
must follow the WEP key policy set by the
key
command (see above).
wep_key_range
Examples:
set wep_key 2 ae325e092c
assigns the value ae325e092c to shared WEP key
number 2.
set wep_key 3 n
assigns a null value, deactivating shared WEP key
number 3.
assigns it a value.
key
Default
40
83