Nokia A032 User Manual page 44

Option
Key 1
Key 2
Key 3
Key 4
Valid Size
Active Key
WEP Key Policy
38
These fields are used to enter the shared WEP key values.
Note that the values are not displayed after entry (they
appear as ****). If you want to enter keys in hexadecimal,
prefix them with .
0x
Important: The keys will only work if their length is
within the Valid Size limits (see below). A valid key is
shown in green. If you enter a key that is too long, it will
be shown in red.
(Read only) Tells you the valid size of the password for
the current setting of WEP Key Policy. This indicates how
many characters should be in the WEP key.
This determines which of the four shared WEP keys is
active (i.e. used for transmission).
This parameter determines the number of bits allowed
for the WEP keys.
• Normal – IEEE802.11 compatible mode: 40 bits
• Strong – 128-bit key length
• Custom – See Min and Max key length settings in
Advanced WEP setup on page 49
Description
Nokia A032 Advanced User Guide