Nokia A032 User Manual page 177

Running the WEPGen utility
4 Click .
OK
5 Enter the IP address of the target access
point.
6 Click .
Send
The data will be transferred. Any errors
which occur should be reported at this time.
The TFTP dialog box will remain on the
screen so that you can send to several
access points in turn by modifying the IP
address.
7 When you're finished, click
Using TFTP
If you have saved a WEP key database using
the name
nids.txt
access point using a TFTP client utility (see
Using TFTP on page 103).
Briefly:
1 Enter the IP address of the access point.
2 Specify
nids.txt
(destination).
.
Close
you can transfer it to the
as the target filename
171