Nokia A032 User Manual page 200

Steps 4-7: Restart the
Nokia A032 in BIOS
communication mode.
194
You'll see the Nokia Access Point Upgrade
utility window:
Initially, you'll see
Status: Access Point not ready
4 Select the correct
5 Switch off the Nokia A032.
6 Press and hold the
the unit on again. Continue to hold the
button while the
mode
on, then go off. This takes about five
seconds.
7 Keep holding the button until the
come on again. This happens about 5
seconds after they have gone off.
8 When the
info
the button.
Assuming you have the correct serial cable and
COM port a message will appear in the Nokia
(e.g.
Serial Port
button and switch
mode
LEDs all switch
info
LEDs come on again, release
Nokia A032 Advanced User Guide
).
COM1
LEDs
info